Live News

28.3°C
  • Indian
28.3°C
  • California
November 7, 2026
Follow Us:
MRO Business Today, Latest Aerospace NewsUpcoming FacilityGE Aerospace improves fan blade repair cycle time by 32.4% at Hungary Facility
GE Aerospace cuts composite fan blade repair cycle time by 32.4% at its Hungary facility.

GE Aerospace improves fan blade repair cycle time by 32.4% at Hungary Facility

GE Aerospace has improved production efficiency at its component repair facility near Budapest, Hungary, cutting cycle time for composite engine fan blade repairs by 32.4% by implementing its FLIGHT DECK lean operating model.

The improvements followed a temporary production pause in early 2025, when the facility upgraded two autoclaves used to cure and process materials for composite engine components. The site supports fan blade repairs for the CFM LEAP, GEnx and GE90 engine programmes. The interruption created a significant backlog, with work in progress nearly doubling by April 2025 and putting pressure on turnaround times and customer deliveries.

To accelerate recovery, GE Aerospace launched a process improvement initiative focused initially on LEAP engine fan blade repairs. In May 2025, nearly 120 employees participated in a shingijutsu kaizen event to identify production bottlenecks, reduce waste and improve shop-floor performance. The team set a target of increasing weekly output from the composite repair cell by more than 200% to help meet customer demand and clear the accumulated backlog.

The improvement programme focused on strengthening daily management, reducing rework and reorganising the repair process. Employees identified recurring issues in LEAP fan blade paint and polyurethane paste repairs, which were contributing to repeated work. The facility consequently brought final painting and labelling activities in-house from an external supplier, allowing components to remain on-site and move through the process using a one-piece-flow approach.

The team also redesigned the shop-floor layout to reduce unnecessary movement between workstations. With some parts previously travelling thousands of metres between operations, related workstations were repositioned in sequence to improve material flow. Additional changes included introducing a U-shaped workstation for repair material preparation, standardising painting processes, combining operations, and installing new clamping mechanisms and protective foam to improve handling safety.

These measures reduced the time required to transport parts through the LEAP fan blade repair cell by 90%, with some internal travel distances falling from several thousand metres to a few hundred. The facility also reported a 32.4% reduction in repair cycle time.

According to Tim McQueen, Repair General Manager at GE Aerospace, the team demonstrated the potential to improve LEAP fan blade deliveries by 67%. The facility subsequently adopted a productivity measure based on the average number of parts completed per operator per shift, recording a 31% improvement in output following the changes.

The gains have extended beyond cycle time and production output. Over the 12 months following the improvement initiative, the Hungary facility reduced rework on composite components by 62.5%, cut in-process inventory by more than 50% and reduced its accumulated backlog by 75%. The overall distance travelled by a blade during its repair journey within the facility also fell by more than 80%.

Also Read – Vertical Aerospace opens aircraft assembly centre for Valo eVTOL programme

The programme has also delivered improvements in workplace organisation and employee engagement. Between May 2025 and May 2026, the site’s employee engagement score for FLIGHT DECK increased by 30%, reflecting greater participation in continuous improvement activities.

The results demonstrate how lean manufacturing practices, shop-floor redesign and employee-led process improvements can help component MRO facilities increase repair throughput, reduce turnaround times and improve inventory management. For GE Aerospace’s Hungary operation, the changes have strengthened its ability to support fan blade repair requirements across multiple engine programmes while addressing the backlog created by the earlier production interruption.

Related Post